Description
Description
Combined into intelligent electronic circuit board designs, our LED upgrades contain 12 bright white LEDs for impressive daytime or nighttime illumination together with 12 amber LEDs for the turn signal function in the front kit. While the rear kit contains 12 amber LEDs for turn signals and 12 intense red LEDs as running lights, which become extra intense red for brake light function.
When the ignition is on, the driving lights are always on until you indicate. When indicating, the driving light goes out on the indicating side and flashes amber. Cancel your turn signal and the driving light comes back on. At the rear, these products work alongside your existing brake light, so you have three brake lights for maximum safety. When indicating, the brake light goes out on the indicating side and the turn signal illuminates. Cancel the turn signal and the brake light will come back on. The design always gives priority function to the turn signals when they are activated. Hazard lights will operate as normal.
Designed specifically for earlier BMW models: R, F, G, K and HP series from 2000-2014. Please check the turn signal housing shape is correct before ordering.
Key Features
- Combined high intensity LED Dual Function front driving lights/turn signals and Triple Function rear running/brake lights/turn signals kit
- Automotive industry approved LEDs from Osram
- Up to 10x brighter than OEM
- Compatible with CAN bus motorcycle electronics
- Guaranteed no fault codes
- Fits neatly inside existing OEM turn signal housings
- Simple Self Installation – full installation kit and directions provided
- Tech support available by phone and online
- No brackets, drilling or clamping required
- Keeps you safer without spoiling the look of your bike
- 4-year warranty
Designed and manufactured in the USA and the UK.
Front kit – Package Includes:
- 2 x Dual Function LED Driving Light/Turn Signals
- 2 x Weiser wires 900 mm long (Black)
- 1 x Extension wire 900mm long
- 5 x zip ties
- 1 x Posi Twist
- 1 x Posi Tap
- 1 x Posi Lock
- 2 x Locking Keys
- Installation instructions and circuit diagram
Rear Kit – Package includes:
- 2 x Triple Function LED Running/Brake Light/Turn Signals
- 2 x Weiser wires 900 mm long (Black)
- 2 x Weiser wires 900 mm long (Grey)
- 5 x zip ties
- 2 x Posi Twist
- 1 x Posi Tap
- 1 x Posi Lock
- 2 x Locking Keys
- 1 x Solid State Dual electronic relay with battery termination
- Installation instructions and circuit diagram
Technical Spec:
- LED circuitry matched to the 10w bulb they replace
- 12V
- 1A max (each pair)
