EXTREME EVO LED Triple Function Running/Brake/Turn Rear Kit

Description

Combined into an attractive intelligent electronic circuit board design, the rear triple function kit offers Weiser’s best ever performing multifunction turn signals. The rear lights contain 12 amber LEDs for the turn signal function and 12 bright red LED’s for running lights and a high intensity brake light function.

When the ignition is on, the rear running lights are always on until you indicate. When indicating, the running light goes out on the indicating side and flashes amber. Cancel your turn signal and the running light comes back on. At the rear, these products work alongside your existing brake light, so you have up to three brake lights for maximum conspicuity & safety. When indicating, the brake light goes out on the indicating side and the turn signal illuminates. Cancel the turn signal and the brake light will come back on. The design always gives priority function to the turn signals when they are activated. Hazard lights will operate as normal.

Designed specifically for 21′ – onwards’ BMW R 1250 GS & GS/A ONLY.

Key Features

• High intensity LED Triple Function rear running/brake lights/turn signals kit
• Automotive industry approved LEDs from OSRAM
• Up to 10x brighter than OEM lights
• OSRAM LEDs come in bright, vibrant colors for maximum visibility
• Compatible with the bikes CAN-bus motorcycle PWM signal electronics
• Guaranteed no fault codes
• Kits include all housings and OEM turn signal cables & connectors.
• Simple self-installation – full installation kits and directions included
• Tech support available by phone and online
• Installation is non-invasive no OEM wires are cut. No brackets, drilling or clamping required.
• Increases conspicuity and safety without spoiling the look of your bike
• 4-year warranty

Designed and manufactured in the USA and the UK.

Rear Kit – Package includes:

• 2 x Triple Function LED Running/Brake Light/Turn Signals
• 2 x Weiser wires 900 mm long (Black)
• 2 x Weiser wires 900 mm long (Grey)
• 5 x zip ties
• 2 x Posi Twist
• 1 x Posi Tap
• 1 x Posi Lock
• 2 x Locking Keys
• 1 x Solid State Dual electronic relay with battery termination (Also allows the installation of the Weiser Dual Function front kit.
• Installation instructions and circuit diagram

Technical Spec:

• Compatible with OEM PWM (Pulse Width Modulation) signals from CAN-bus  (for non USA variants)
• 12V
• 90 mA (each pair) red running lights
• 250mA (each pair) when Brake light activated.

Click image to download PDF guide